The RUCKUS T610 delivers blazing-fast connectivity for medium-density outdoor deployments, with data rates up to 2.5Gbps—the highest available data rates for Wi-Fi clients. Patented RUCKUS adaptive antenna technology improves signal quality for every connected device, everywhere.
Quick Specs
Figure 1 shows the appearance of 901-T610-WW01.
Table1 shows the Quick Specs.
|
SKU |
901-T610-WW01 |
|
Concurrent Users |
512 |
|
Ethernet Ports |
2 x 1GbE |
|
Fiber Interface |
No |
|
PHY Rate at 2.4 GHz, maximum |
600 Mb/s |
|
PHY Rate at 5 GHz, maximum |
1733 Mb/s |
|
Radio Chains and Streams |
4x4:4 |
|
Rx Sensitivity at 2.4 GHz |
-104 dBm |
|
Rx Sensitivity at 5 GHz |
-104 dBm |
Product Details
Figure 2 shows the front panel of 901-T610-WW01.
ZoneFlex-901-T610-WW01 has these key features:
①Industry's Highest Performing 802.11ac Wave 2 AP
②MU-MIMO Increases Efficiency And Capacity
③Dual Concurrent 4X4:4 MIMO and Beamflex+
④Adaptive Polarization Diversity With Beamflex+ (PD-MRC)
⑤Reduced Wi-fi Interference
⑥Environmentally Hardened
⑦Field Accessible IP67 Usb Interface For IoT Applications
⑧Flexible Deployment Options
Compare to Similar Items
Table 2 shows the comparison.
|
Product Name |
901-T610-WW01 |
|
|
PHY Rate at 2.4 GHz, maximum |
600 Mb/s |
600 Mb/s |
|
PHY Rate at 5 GHz, maximum |
1733 Mb/s |
1733 Mb/s |
|
Radio Chains and Streams |
4x4:4 |
4x4:4 |
|
Rx Sensitivity at 2.4 GHz |
-104 dBm |
-104 dBm |
|
USB(IoT Ready) |
Yes |
No |
|
Fiber Interface |
No |
Yes |
|
GPS |
No |
Yes |
Get More Information
Do you have any question about the 901-T610-WW01?
Contact us now via Live Chat or [email protected].
901-T610-WW01 Specification
RUCKUS T610 Specification |
|
|
WI-FI |
|
|
Wi-Fi Standards |
IEEE 802.11a/b/g/n/ac Wave 2 |
|
Supported Rates |
802.11ac: 6.5 to 1,733Mbps (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80) 802.11n: 6.5Mbps to 600Mbps (MCS0 to MCS 31) 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6Mbps 802.11b: 11, 5.5, 2 and 1 Mbps |
|
Supported Channels |
2.4GHz: 1-13 5GHz: 36-64, 100-144, 149-165 |
|
MIMO |
4x4 SU-MIMO 4x4 MU-MIMO |
|
Spatial Streams |
4 SU-MIMO 3 MU-MIMO |
|
Radio Chains and Streams |
4x4:4 |
|
Channelization |
20, 40, 80MHz |
|
Security |
WPA-PSK, WPA-TKIP, WPA2-Personal, WPA2-Enterprise, WPA3-Personal, WPA3-Enterprise, AES, 802.11i, Dynamic PSK WIPS/WIDS |
|
Other Wi-Fi Features |
WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v Hotspot Hotspot 2.0 Captive Portal WISPr |
|
RF |
|
|
Antenna Type |
BeamFlex+ adaptive antennas with polarization diversity Adaptive antenna that provides up to 4,000+ unique antenna patterns |
|
Antenna Gain (max) |
Omni -Up to 3dBi Sector -Up to 8dBi |
|
Peak Transmit Power (aggregate across MIMO chains) |
28dBm for both 2.4GHz & 5GHz |
|
BeamFlex+ SINR Transmit Power Gain* |
Up to 6 dB |
|
BeamFlex+ SINR Receive Power Gain* |
Up to 4 dB |
|
Minimum Receive Sensitivity1 |
-104dBm |
|
Frequency Bands |
ISM (2.4-2.484GHz) U-NII-1 (5.15-5.25GHz) U-NII-2A (5.25-5.35GHz) U-NII-2C (5.47-5.725GHz) U-NII-3 (5.725-5.85GHz) |
|
Performance and Capacity |
|
|
Peak PHY Rates |
2.4GHz: 600Mbps 5GHz: 1733Mbps |
|
Client Capacity |
Up to 512 clients per AP |
|
SSID |
Up to 31 per AP |
|
Ruckus Radio Management |
|
|
Antenna Optimization |
BeamFlex+ Polarization Diversity with Maximal Ratio Combining (PD-MRC) |
|
Wi-Fi Channel Management |
ChannelFly Background Scan Based |
|
Client Density Management |
Adaptive Band Balancing Client Load Balancing Airtime Fairness Airtime-based WLAN Prioritization |
|
SmartCast Quality of Service |
QoS-based scheduling Directed Multicast L2/L3/L4 ACLs |
|
Mobility |
SmartRoam |
|
Diagnostic Tools |
Spectrum Analysis SpeedFlex |
|
Networking |
|
|
Controller Platform Support |
SmartZone ZoneDirector Unleashed2 Cloud Standalone |
|
Mesh |
SmartMesh™ wireless meshing technology. Self-healing Mesh |
|
IP |
IPv4, IPv6 |
|
VLAN |
802.1Q (1 per BSSID or dynamic per use based on RADIUS) VLAN Pooling Port-based |
|
802.1x |
Authenticator and Supplicant |
|
Tunnel |
L2TP, GRE, Soft-GRE |
|
Policy Management Tools |
Application Recognition and Control Access Control Lists Device Fingerprinting Rate Limiting |
|
IoT Capable |
Yes |
|
Physical Interfaces |
|
|
Ethernet |
2 x 1GbE ports, RJ-45 LACP |
|
USB |
1 USB 2.0 port, Type A connector |
|
Physical Characteristics |
|
|
Physical Size |
31.7(L) x 24.1(W) x 9.5(H) cm 12.8(L) x 9.5(W) x 3.7(H) in |
|
Ingress Protection |
IP-67 |
|
Mounting |
Wall Mount Pole Mount Flat Surface Mounting bracket sold separately - see Optional Accessories section |
|
Operating Temperature |
-40°C (-40°F) to 65°C (149°F) |
|
Operating Humidity |
Up to 95%, non-condensing |
|
Wind Survivability |
Up to 266 km/h (165mph) |
Customer questions & answers
Customer reviews
0 out of 5
No reviews yet